Filters F1 to F4
F1 Series Features
Filter element replaceable without removing body filter from installation
Optional bypass enables a continuous self cleaning flow around the element
Nominal pore sizes for sintered element: 0.5, 2, 7, 15, 40, 60 and 90 μm
Nominal pore sizes for strainer element: 100, 150, 250 and 450 μm
Maximum working pressure up to 6000 psig (413 bar)
Working temperature from -20o F to 900o F (-28oC to 482oC)
Stainless steel and brass construction
Variety of end connections
F2 Series Features
Compact inline design
Nominal pore sizes for sintered element: 0.5, 2, 7, 15, 40, 60 and 90 μm
Nominal pore sizes for strainer element: 100, 150, 250 and 450 μm
Maximum working pressure up to 3000 psig (207 bar)
Working temperature from -20℉ to 900℉ (-28℃ to 482℃)
Body materials: 316 S.S. 316L S.S. 304 S.S. 304L S.S. 321 S.S. and Brass
Variety of end connections
F3 Series Features
All-welded construction prevents bypass flow
Large filtration area
Inline filters are for use where space is limited
Filter is easily cleaned by backflushing
Sintered element is available in 0.5, 2, 7, 15, 40, 60 and 90 μm
Maximum working pressure: 6000 psig (413 bar)
Working temperature from -40℉ to 900℉ (-40℃ to 482℃)
Body materials: 316 S.S. 316L S.S. 304 S.S. and 304L S.S.
Variety of end connections available
F4 Series Features
High particle removal efficiency and low particle shedding
Outstanding chemical compatibility and low outgassing
Inline, all-welded construction
0.003 µm ceramic filtration
Work pressure up to 3000 psi(206 bar)
Maximum flow rates: 30, 225, 600, 900, and 2700 std L/min
Internal surface finished to a roughness average of 5 µin.(0.13 µm) Ra v1/4, 1/2, and 3/4 in. integral male GFS face seal fittings